In the ever-evolving world of laundry, front-loading washers have become a popular choice due to their efficiency and sleek design. Similarly, Tide Pods have become a popular detergent choice for many households due to their good cleaning quality and versatility – they can be used in both HE and non-HE washers.
Nonetheless, when using Tide pods in front load washers, several problems are likely to arise.
So, how can you fix these possible problems when they arise?
Well, that’s where this guide comes in… I will tell you how you can fix the various Tide pods front loader problems you might run into.
Tide pods front loader problems [and quick fixes]
Typically, these problems arise if you are not using the Tide pods correctly.
Having that in mind, below are possible problems that you might experience and what you can do to fix them:
Pods getting stuck in the dispenser (Tide pods leaving detergent residue in washer)
Tide pods are designed to be put inside the washer drum.
This is because if you put them inside the detergent dispenser, they might not dissolve fully thereby leaving detergent residue in the dispenser compartment.
Pro tip: With time, this residue might accumulate to the extent of blocking the detergent valves.
So, if you have been putting your Tide Pods inside the dispenser compartment, it is time for a change – start putting them inside the drum.
Tide pods not dissolving in front loader – what you can do
Start by making sure that you are putting the pods inside the drum.
Something else: Tide pods are designed to be put before the laundry – otherwise, there’s a possibility for the pods not to dissolve fully.
So, put your pods at the back of your washer drum before loading any laundry.
Other than that, confirm that you are not overloading your washing machine.
You see, overloading the washer might result in the water not being enough to clean the laundry or for the pods to dissolve.
It is advisable not to load the washer past ¾ way.
Pro tip: If your washer has a glass lid/door, you can peep to make sure that the water is enough to dissolve the pods.
Even though Tide Pods are designed to dissolve in water at all temperatures, it is not uncommon for the pods not to dissolve fully during the winter.
This is usually more so when the water gets really cold.
To fix this, use warm water for your laundry (provided your laundry fabric won’t ruin).
Tide pods staining/spotting/streaking my clothes
Normally, this occurs if the pods are not dissolving fully.
So, to prevent Tide Pods from spotting your clothes, be sure to follow the steps above – Tide Pods not dissolving.
But, what should you do if you note that your clothes have been stained by Tide Pod residue?
Immediately you note spots on your clothes, put them back in the washer, and run a wash cycle using the largest load capacity setting.
This is to make sure that there is enough water in the washer to dislodge the detergent residue spots.
Pro tip: Putting pod-stained laundry in the dryer might result in the stain being permanent. So, avoid putting such laundry in the dryer.
Are tide pod stains permanent?
Yes and no – it all comes down to what you do after you note the stains.
If you rewash your laundry immediately you note the stains, there is a possibility to get rid of them hence they might not be permanent.
However, if you put the laundry in the dryer and dry it, high chances are the dryer’s heat might make the stains permanent.
That is why it’s always advisable not to put pod-stained clothes inside the dryer.
Front load washer tide pods not working
Of course, if your clothes are coming out still dirty, start by confirming that the pods are dissolving… Refer to the section above – Tide Pods not dissolving.
Pro tip: An easy telltale of pods not fully dissolving is the presence of stains on laundry. So, be on the lookout for this.
On the other hand, if the pods are dissolving fully, chances are you are not using enough pods for your laundry size.
Pro tip: Tide recommends you add two Tide Pods® pacs for medium loads, one pod for small loads, and three pods for large loads.
Something else: The number of pods to use also depends on the pod type. For instance, two Tide Pods™ are equal to one Tide Power Pod™.
In short, for best results, be sure you are adhering to the instructions on the container your pods came in.
Can you use tide pods in a front load washer – Can you use pods in LG front load washers?
Yes, you can.
Tide Pods are designed to be used in most washing machine models (including front load washer models).
Other than front load washers, you can also use Tide Pods in top load washers and High Efficiency (HE) washers.
So, where do you put your pods?
Where do you put a tide pod in a front loading washer?
Tide pods are designed to be put at the bottom of the washer drum.
And, to ensure that the pod dissolves fully, put the pod before putting the laundry.
Tide pods front loader problems – parting words
Be sure to put your Tide Pods inside the drum. This will prevent residue formation in the detergent dispenser while ensuring efficient dispersion of the detergent hence cleaner laundry.